INTEX #28032 Protection Cover Round Pool
Add to WishlistIntex Metal Frame Pool Cover
The cover prevents contamination of the water by leaves or other debris when the pool is not in use.
The small holes in the Intex cover allow adequate ventilation of the pool.
They also make it easy to remove the cover from the pool even after a downpour.
This cover sheet has a 25cm overhang and a sturdy tie line.
This allows the cover to be securely attached to the pool and stay in place even in windy weather.
NOTICED
Make sure the mud pool cover is the correct size for the above ground pool.
Two people are required to install the cover over the pool.
Slowly pull the cover over the pool and tighten the cover rope attachment by waking around the pool and gently pulling the rope attachment to the end where the ropes meet. Move the pool cover overhang so the rope attachment can slide easily. Do not apply excessive force.
The main purpose of the drainage holes on the cover is to prevent water accumulation, especially when it rains. If necessary, remove standing water first before removing the pool cover to minimize damage to the pool cover
The pool cover will sink slightly due to the weight of the pool cover. This is normal and does not affect the operation of the pool cover. Consumers may consider installing an inflatable swim ring/garden hose in the middle between the cover and the water surface.
More Information
SKU | 109169 |
Brand | Intex |
Dimensions | 457cm |
In Stock